Introducing our 1.5" width, 184" - 318" (26' 6"), .055 thickness, 7/8" tooth, 77 degree Bandsaw Blades, excellent for frozen wood and exotic hardwoods.
Packs of 10 or Full Box, $32/blade +
The larger the pack, the bigger the savings - From $32 a blade, with low Flat-Rate shipping. Best price anywhere.
For precision cutting in various applications, our 1.5" width, 205" - 221" (18' 5"), 050 thickness, 7/8" tooth, 7 degree Bandsaw Blades, excellent for frozen wood and exotic hardwoods. Here are the key features:
Precision-Crafted:
These blades come with a 1.5" width and a 7/8 inch tooth design, featuring a 7-degree tooth face angle. This configuration ensures clean and precise cuts in a wide range of materials, with 7/8" being the most popular.
Versatile Cutting:
Our all-purpose blades are designed to tackle softwoods, hardwoods, and frozen woods, making them suitable for a variety of tasks, but especially dense, hard-to-cut lumber.
American-Made Quality:
Manufactured in the USA, these blades are built to last.
Wide Compatibility:
These blades fit band saws and portable saw mills in various makes and models, as well as DIY saws, providing convenience and versatility.
Blade Options:
We offer a variety of blade widths, from 1" to 2", and in dozens of combinations of lengths, tooth width, spacing, and angle, so check out our store page for more options. Need something special? Reach out to us for a custom quote.
Upgrade your cutting capabilities with our 1.5" width, 184" - 318" (26' 6"), .055 thickness, 7/8" tooth, 77 degree Bandsaw Blades, excellent for frozen wood and exotic hardwoods. Discover the difference in performance, durability, and versatility – order yours today!
Once your item has arrived, please leave a 5-star review to indicate receipt of product.
In case of defective product, buyer has 24 hours to contact us to start a claim.
Returns policy: In case of defective product claims, buyer should reach out with a claim within 24 hours of receipt of product. Once claim is processed, buyer has 30 days to return item.
All other returns will require return postage as the responsibility of the buyer, and a restocking fee will be charged at 12% of original cost. Reimbursement or replacement will be sent once item has been received.
Additional Info:
Tooth Spacing, or Pitch:
When we reference 7/8, that's the pitch, which is measured from the gullet to the tooth tip and is determined by the TPI. 7/8" is a good all-around pitch for portable band saws, and most types of wood.
Types of Wood
The carbon steel blades work with a variety of types of wood -
Softwoods: Softwoods, used most commonly in for construction, are evergreen trees - conifers with permanently attached needles, like cedar, pine, spruce, hemlock, fir and redwood.
Hardwoods: Deciduous trees that lose their leaves in colder months. Species like walnut, maple, beech, cherry, elm and oak are all hardwood trees
Hook Angle:
Hook angle, such as 10/30, is the angle, as seen from the side of the blade, of the cutting face (known as the face angle) of each blade tooth (10 degrees), and the angle of the back of each tooth (30 degrees). Common and general purpose angle combination is 10/30 - 10 degrees of face angle, and 30 degrees of back angle. This spec is good for a variety of softwoods, like yellow pine, spruce and cedar, and hardwoods like oak, walnut and maple.
This 7 degree hook angle provides extra cutting power for frozen woods and dense hardwoods.
Tooth set (side set) and best practices:
Tooth set, also known as side set, is the angle as seen from above the blade - a pattern in the tooth set alternates between left, then right, then a straight tooth, and repeats left, right, then straight. This is a common pattern, known as a raker. It determines whether the blade cuts effieciently in your chosen material, or gets clogged with chips. The angle used for these left and right sets are commonly between .0021 - .0022 of inch set, a good general purpose spec.
For working with majority softwoods, like Yellow Pine, a wider tooth set of .0025 will allow extra space for the blade as the softwood expands around the blade, preventing it from pinching. This set can be achieved when re-sharpening blades.
Blade Thickness:
.042 blades - Longer lasting when used with lower horsepower machines of 24HP or less. Best where speed and production is not critical.
.050 and .055 blades - Cuts more efficiently, especially through knotty, frozen, dry or especially dense materials. For machines over 24HP.
Quality Welds:
A note from our manufacturer on our blade welds - "Premature breakage at the weld is not normal. Several weld break testings are performed on a twist test machine throughout each day to ensure top strength quality. We take a welded piece and run it through the twist test machine. We are looking to see if our welds are between 80-90 % of the blade strength.
Often times we get 100%. This means the blade itself breaks before our weld. In those cases, the weld is just as strong as the blade."
If you have any questions about the type of blade you will need, send us a message!
